Yamaha GRIZZLY 700 FI YFM7FGPX, Owner'S Manual

Page: 28 / 164

4-5
4
EBU27291
Multifunction display
The multifunction display is equipped with the fol-
lowing:
●
a speedometer (which shows the riding speed)
●
an odometer (which shows the total distance
traveled)
●
two tripmeters (which show the distance trav-
eled since they were last set to zero)
● a clock
● an hour meter (which shows the total time the
key has been turned to “ON”)
● a fuel meter
● a self-diagnosis device
Odometer and tripmeter modes
Pushing the “SELECT” button switches the display
between the odometer mode “ODO” and the trip-
meter modes “A” and “B” in the following order:
ODO
→
TRIP A
→
TRIP B
→
ODO
To reset a tripmeter, select it by pushing the “SE-
LECT” button, and then push the “RESET” button
for at least three seconds. The tripmeters can be
used to estimate the distance that can be traveled
with a full tank of fuel. This information will enable
you to plan future fuel stops.
NOTE:
Holding in the “SELECT” button and then turning
the key to “ON” switches the display between
“mph” and “km/h”.
Clock mode
Pushing the “CLOCK” button switches the display
between the clock mode “CLOCK” and the hour
meter mode “HOUR” in the following order:
1. “CLOCK” button
2. “RESET” button
3. “SELECT” button
4. Speedometer
5. Fuel meter
6. Clock/Hour meter
7. Odometer/Tripmeter A/Tripmeter B
U3B462E0.book Page 5 Tuesday, March 20, 2007 11:46 AM