Yamaha Grizzly 550 YFM5FGA Owner'S Manual Download

Page: 141 / 170

8-61

6. Connect the headlight coupler.
7. Install the headlight bulb cover.

NOTICE:

Make sure the headlight bulb cover is se-
curely fitted and seated properly.

[ECB01080]

8. Install the cover at the rear of the headlight.
9. Adjust the headlight beam if necessary.

EBU25551

Adjusting a headlight beam

NOTICE

ECB00690

It is advisable to have a Yamaha dealer make
this adjustment.

To raise a headlight beam, turn the headlight beam
adjusting screw in direction (a).
To lower a headlight beam, turn the adjusting
screw in direction (b).

EBU25641

Replacing the tail/brake light bulb

If the tail/brake light bulb burns out, replace it as
follows.

1. Remove panel I. (See page 8-8.)
2. Remove the bulb holder (together with the

bulb) by turning it counterclockwise.

1. Do not touch the glass part of the bulb.

1. Headlight beam adjusting screw

U43P12E0.book Page 61 Monday, July 13, 2009 5:26 PM

Summary of Contents for Grizzly 550 YFM5FGA











































































































































































Search results

Summary of Contents for Grizzly 550 YFM5FGA

Reviews:

Related manuals for Grizzly 550 YFM5FGA

Brands by name

Popular brands

Yamaha Grizzly 550 YFM5FGA, Owner'S Manual

Search results

Summary of Contents for Grizzly 550 YFM5FGA

Reviews:

Related manuals for Grizzly 550 YFM5FGA

Brands by name

Popular brands