manualshive.com logo in svg

Yamaha GRIZZLY 550 FI YFM5FGY, Owner'S Manual

The Yamaha GRIZZLY 550 FI YFM5FGY is a powerful all-terrain vehicle. Our website offers the complete Owner's manual for this model, available for free download. It provides detailed instructions and information on operating and maintaining the GRIZZLY 550 FI, ensuring a smooth and exciting off-road experience. Download it now from manualshive.com!

Share
Download
background image

5-1

5

EBU19200

PRE-OPERATION CHECKS

EBU19222

Pre-operation check list 

Before operating this ATV, be sure to check the items listed in the following table.

WARNING

EWB00480

Always inspect your ATV each time you use it to make sure it is in safe operating condition.
Always follow the inspection and maintenance procedures and schedules described in the Owner’s
Manual. Failure to inspect increases the possibility of an accident or equipment damage.

TIP

The maintenance of some items in the table has to be performed by a Yamaha dealer. Refer to the periodic
maintenance charts on page 8-3 to determine which service should be performed by a Yamaha dealer.

ITEM

ROUTINE

PAGE

Fuel

• Check fuel level in fuel tank, and add recommended fuel if neces-

sary.

• Check fuel line for leakage. Correct if necessary.

4-16, 5-3

Engine oil

• Check oil level in engine, and add recommended oil to specified lev-

el if necessary.

• Check ATV for oil leakage. Correct if necessary.

5-3, 8-22

Final gear oil

• Check ATV for oil leakage. Correct if necessary.

5-3, 8-26

Differential gear oil

• Check ATV for oil leakage. Correct if necessary.

5-3, 8-29

Coolant

• Check coolant level in reservoir, and add recommended coolant to 

specified level if necessary.

• Check cooling system for leakage. Correct if necessary.

5-3, 8-31

U28P60E0.book  Page 1  Thursday, April 17, 2008  8:51 AM

Summary of Contents for GRIZZLY 550 FI YFM5FGY









































































































































































Reviews:

No comments

Related manuals for GRIZZLY 550 FI YFM5FGY

Brands by name

Popular brands

Load more brands