manualshive.com logo in svg

Yamaha GRIZZLY 550 FI YFM5FGPSEY, Owner'S Manual

The Yamaha GRIZZLY 550 FI YFM5FGPSEY Owner's Manual is available for free download at manualshive.com. This comprehensive manual provides a detailed guide on operating and maintaining the powerful Yamaha GRIZZLY 550 FI YFM5FGPSEY, ensuring users can maximize their enjoyment and safety with this exceptional product.

Share
Download
background image

8-44

8

TIP

The engine idling speed must be checked, and ad-
justed if necessary, before adjusting the throttle ca-
ble free play.

1. Slide the rubber cover back.
2. Loosen the locknut.
3. To increase the throttle cable free play, turn

the throttle cable free play adjusting bolt in di-
rection (a). To decrease the throttle cable free
play, turn the adjusting bolt in direction (b).

4. Tighten the locknut.
5. Slide the rubber cover to its original position.

EBU24060

Valve clearance 

The valve clearance changes with use, resulting in
improper air-fuel mixture and/or engine noise. To
prevent this from occurring, the valve clearance
must be adjusted by a Yamaha dealer at the inter-
vals specified in the periodic maintenance and lu-
brication chart.

EBU24071

Adjusting the drive select lever safety 
system cable 

The drive select lever safety system cable stretch-
es with use, which can result in improper function.
Therefore, the safety system cable should be
checked and adjusted by a Yamaha dealer at the
intervals specified in the periodic maintenance and
lubrication chart.

EBU27470

Checking the front and rear brake pads 

The front and rear brake pads must be checked for
wear at the intervals specified in the periodic main-
tenance and lubrication chart. Each brake pad is
provided with a wear indicator groove, which al-

1. Rubber cover

2. Throttle cable free play adjusting bolt

3. Locknut
4. Throttle cable free play

2WD

4WD

3

2

1

4

(b)

(a)

U34D60E0.book  Page 44  Tuesday, June 17, 2008  6:34 PM

Summary of Contents for GRIZZLY 550 FI YFM5FGPSEY







































































































































































Reviews:

No comments

Related manuals for GRIZZLY 550 FI YFM5FGPSEY

Brands by name

Popular brands

Load more brands