manualshive.com logo in svg

Yamaha Grizzly 450 YFM45FGX, Owner'S Manual, Page: 49 / 182

Share
Download
Yamaha Grizzly 450 YFM45FGX Owner'S Manual Download Page 49

5-5

5

EBU28520

Front and rear brakes 

Brake levers and brake pedal

●

Check that there is no free play in the front brake
lever. If there is free play, have a Yamaha dealer
check the brake system.

●

Check for correct free play in the rear brake lever
and brake pedal. If the free play is incorrect, ad-
just it. (See page 8-41.)

●

Check operation of the levers and pedal. They
should move smoothly and there should be a
firm feeling when the brake is applied. If not,
have a Yamaha dealer check them.

Brake fluid level (front brake)

Check the brake fluid level. Add fluid if necessary.
(See page 8-39.)

Brake fluid leakage (front brake)

Check to see if any brake fluid is leaking out of the
hose, joint or brake fluid reservoir of the front
brake. Apply the brake firmly for one minute. If the
lever moves slowly inward, there may be a leak in
the brake system. If there is any leakage, the brake
system should be checked by a Yamaha dealer.

Brake operation

Test the brakes at slow speed after starting out to
make sure they are working properly. If the brakes
do not provide proper braking performance, check
the brake pads and friction plates for wear. (See
page 8-38.)

WHAT CAN HAPPEN
You could be burned by hot fluid and steam
blown out under pressure.
HOW TO AVOID THE HAZARD
Wait for the engine to cool before removing
the radiator cap. Always use a thick rag over
the cap. Allow any remaining pressure to es-
cape before completely removing the cap.

Recommended brake fluid:

DOT 4

U17S10E0.book  Page 5  Friday, July 6, 2007  1:37 PM

Summary of Contents for Grizzly 450 YFM45FGX























































































































































































Reviews:

No comments