8-24
8
EBU23427
Differential gear oil
The differential gear case must be checked for oil
leakage before each ride. If any leakage is found,
have a Yamaha dealer check and repair the ATV.
In addition, the differential gear oil level must be
checked and the oil changed as follows at the in-
tervals specified in the periodic maintenance and
lubrication chart.
To check the differential gear oil level
1. Place the ATV on a level surface.
2. Remove the differential gear oil filler bolt and
its gasket, and then check the oil level in the
differential gear case. The oil level should be
at the brim of the filler hole.
3. If the oil is below the brim of the filler hole, add
sufficient oil of the recommended type to
raise it to the correct level.
4. Check the gasket for damage, and replace it
if necessary.
5. Install the oil filler bolt and its gasket, and then
tighten the bolt to the specified torque.
1. Differential gear oil filler bolt
2. Gasket
3. Differential gear oil
4. Correct oil level
Tightening torque:
Differential gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
1 2
3
4
U2LC61E0.book Page 24 Wednesday, February 26, 2014 3:56 PM
Summary of Contents for GRIZZLY 450 YFM450DF
Page 19: ...1 8 1 For Oceania 6 1 2 3 4 5 7 8 9 U2LC61E0 book Page 8 Wednesday February 26 2014 3 56 PM ...
Page 21: ...1 10 1 16 UNDER 1P0 F816L 00 7 6 U2LC61E0 book Page 10 Wednesday February 26 2014 3 56 PM ...
Page 70: ...7 1 7 EBU21142 RIDING YOUR ATV U2LC61E0 book Page 1 Wednesday February 26 2014 3 56 PM ...
Page 167: ...11 2 11 1 Model label U2LC61E0 book Page 2 Wednesday February 26 2014 3 56 PM ...