Yamaha Grizzly 450 2010, Owner'S Manual

Page: 59 / 166

6-1
6
EBU19881
OPERATION
EBU19901
Read the Owner’s Manual carefully before riding
the ATV. If there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
EWB00631
Read the Owner’s Manual carefully to become
familiar with all controls in order to help pre-
vent any loss of control, which could cause an
accident or injury.
EBU26545
Starting a cold engine
NOTICE
ECB00150
See the “Engine break-in” section on page 6-5
prior to operating the engine for the first time.
1. Turn the fuel cock to “ON”.
2. Turn the key to “ON” and the engine stop
switch to “ ”.
3. Shift the drive select lever into the neutral or
park position. The corresponding indicator
light should come on, if it does not come on,
have a Yamaha dealer check the electrical cir-
cuit.
TIP
The engine can be started under the following con-
ditions:
●
The drive select lever is in the neutral or park po-
sition.
●
The rear brake lever is applied with the drive se-
lect lever in any position. However, it is recom-
mended to shift into the neutral or park position
before starting the engine.
4. Use the starter (choke) in reference to the fig-
ure:
Position (1):
Cold engine start with ambient temperature
below 5 °C (40 °F).
Position (2):
Cold engine start with ambient temperature
between 0 °C (30 °F) and 30 °C (90 °F).
U1CT60E0.book Page 1 Monday, May 31, 2010 10:05 AM