manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM35GX, Owner'S Manual

The Yamaha GRIZZLY 350 YFM35GX is a powerful all-terrain vehicle designed to tackle any outdoor adventure. Whether you're a seasoned rider or a beginner, this compact and reliable machine offers ultimate comfort and control. For detailed instructions on operating and maintaining your Yamaha GRIZZLY 350 YFM35GX, you can download the free Owner's Manual from our website.

Share
Download
background image

4-6

4

EBU18391

Front brake lever 

The front brake lever is located on the right handle-
bar. To apply the front brake, pull the brake lever
toward the handlebar grip.

EBU18442

Brake pedal and rear brake lever 

The brake pedal is located on the right side of the
ATV and the rear brake lever is located on the left
handlebar. To apply the rear brake, push down on
the brake pedal or pull the brake lever toward the
handlebar grip.

1. Front brake lever

1. Brake pedal

1. Rear brake lever

U5WH64E0.book  Page 6  Friday, April 20, 2007  3:28 PM

Summary of Contents for GRIZZLY 350 YFM35GX







































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM35GX

Brands by name

Popular brands

Load more brands