Yamaha GRIZZLY 350 YFM35FGZ Owner'S Manual Download Page 15 | Manualshive

Page: 15 / 142

Yamaha GRIZZLY 350 YFM35FGZ Owner'S Manual Download Page 15

1-5

1

**.* kPa
*.** kgf/cm²

*.* psi

**.* kPa
*.** kgf/cm²

*.* psi

NEVER use with drugs or alcohol.

NEVER store fuel or flammable liquids.

This unit contains high-pressure nitrogen
gas.
Mishandling can cause explosion. Do not
incinerate, puncture or open.

Use unleaded gasoline only.

Measure tire pressure when tires are cold.

Adjust tire pressure.
Improper tire pressure can cause loss of
control.
Loss of control can result in severe injury or
death.

Turning the ATV in 4WD-LOCK
(“DIFF.LOCK”) takes more effort.
Operate at a slow speed and allow extra
time and distance for maneuvers to avoid
loss of control.

This pictogram shows the loading limits
and/or maximum load capacity for this ATV.
Follow all load limits and other loading
guidelines in this manual.
Load may include the driver, passenger,
human protective gear, accessories, goods,
luggage, and all other load related items.
Make sure you do not exceed the load limits.
Overloading can cause loss of control.
Loss of control can result in severe injury or
death.

U1AB60E0.book Page 5 Wednesday, April 29, 2009 10:19 AM

«
...
13
14
15
16
17
...
»

Summary of Contents for GRIZZLY 350 YFM35FGZ















































































































































Reviews:

No comments