Yamaha GRIZZLY 350 YFM35FGDZ, Owner'S Manual

Page: 35 / 148

4-9
4
To release the differential gear lock, stop the ATV
and push the switch to the “4WD” position.
TIP
●
If the differential gear lock is not engaging prop-
erly, turn the handlebar back and forth to help it
engage.
●
Riding before the differential gear lock is proper-
ly engaged will cause the vehicle speed to be
limited until engagement is complete.
●
When the ATV is in four-wheel-drive differential
gear lock, the maximum traveling speed is limit-
ed to 31 km/h (19 mi/h). However, if conditions
require full engine power to be available, push
and hold the override switch to disable the differ-
ential gear lock speed limiter. (See page 4-5 for
a detailed explanation of this switch.)
EBU18282
Throttle lever
Once the engine is running, pushing the throttle le-
ver will increase the engine speed.
Regulate the speed of the ATV by varying the
throttle position. Because the throttle is spring-
loaded, the ATV will decelerate, and the engine will
return to an idle any time the throttle lever is re-
leased.
1. On-Command differential gear lock switch “4WD”/“LOCK”
1. Throttle lever
U4S263E0.book Page 9 Wednesday, June 10, 2009 2:29 PM