manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM35FGDY, Owner'S Manual

The Yamaha GRIZZLY 350 YFM35FGDY is a powerful and reliable ATV, perfect for off-road adventures. Ensure optimal performance and safety with the included Owner's Manual. Now available for free download at manualshive.com, providing easy access to the essential manual you need.

Share
Download
background image

8-36

8

WARNING

EWB02080

Operating with improperly serviced or adjust-
ed brakes could cause loss of braking ability,
which could lead to an accident.
After servicing:

●

Make sure the brakes operate smoothly and
that the free play is correct.

●

Make sure the brakes do not drag.

Replacement of brake components requires
professional knowledge. These procedures
should be performed by a Yamaha dealer.

EBU24230

Axle boots 

The axle boots must be checked for damage at the
intervals specified in the periodic maintenance and
lubrication chart. Check the axle boots for tears or
damage. If any damage is found, have them re-
placed by a Yamaha dealer.

1. Distance between brake pedal and footboard

1. Front axle boot (each side)

U4S262E0.book  Page 36  Tuesday, June 10, 2008  11:40 AM

Summary of Contents for GRIZZLY 350 YFM35FGDY

















































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM35FGDY

Brands by name

Popular brands

Load more brands