Yamaha GRIZZLY 350 YFM350TE Owner'S Manual Download Page 77 | Manualshive

Page: 77 / 140

Yamaha GRIZZLY 350 YFM350TE Owner'S Manual Download Page 77

7-20

7

RIDING OVER ROUGH TERRAIN

WARNING

EWB01652

Riding improperly over obstacles could cause
loss of control or a collision. Before operating
in a new area, check for obstacles. Never at-
tempt to ride over large obstacles, such as
large rocks or fallen trees. When you go over
obstacles, always follow proper procedures as
described in the Owner’s Manual.

Riding over rough terrain should be done with
caution. Look out for obstacles which could cause
damage to the ATV or could lead to an upset or
accident. Be sure to keep your feet firmly mounted
on the footboards at all times. Avoid jumping the
ATV as loss of control and damage to the ATV may
result.

SLIDING AND SKIDDING

WARNING

EWB01663

Skidding or sliding improperly may cause you
to lose control of this ATV. You may also regain
traction unexpectedly, which may cause the
ATV to overturn.

1. Storage compartment check hose

1. V-belt case drain plug

UB1460E0.book Page 20 Friday, October 18, 2013 11:47 AM

«
...
75
76
77
78
79
...
»

Summary of Contents for GRIZZLY 350 YFM350TE













































































































































Reviews:

No comments