manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM350FAZ, Owner'S Manual

The Yamaha GRIZZLY 350 YFM350FAZ is a rugged ATV designed for outdoor enthusiasts. With its powerful engine and durable construction, it can conquer any terrain. To ensure a smooth ride and proper maintenance, make sure to download the free Owner's Manual from manualshive.com to have access to all the necessary information and instructions.

Share
Download
background image

4-17

4

TIP

A special wrench can be obtained at a Yamaha
dealer to make this adjustment.

EBU19023

Adjusting the rear shock absorber as-
sembly 

The spring preload can be adjusted to suit the rid-
er’s weight and the riding conditions.

1. Spring preload adjusting ring
2. Position indicator

1. Special wrench

Spring preload setting:

Minimum (soft):

1

Standard:

2

Maximum (hard):

5

U1AB60E0.book  Page 17  Wednesday, April 29, 2009  10:19 AM

Summary of Contents for GRIZZLY 350 YFM350FAZ















































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM350FAZ

Brands by name

Popular brands

Load more brands