manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM350FAZ, Owner'S Manual

The Yamaha GRIZZLY 350 YFM350FAZ is a rugged ATV designed for outdoor enthusiasts. With its powerful engine and durable construction, it can conquer any terrain. To ensure a smooth ride and proper maintenance, make sure to download the free Owner's Manual from manualshive.com to have access to all the necessary information and instructions.

Share
Download
background image

4-14

4

Move the starter (choke) in direction (b) to turn off
the starter (choke).
See the “Starting a cold engine” section on page
6-1 for proper operation.

EBU18881

Seat 

To remove the seat

Pull the seat lock lever upward and pull up the seat
at the rear.

To install the seat

Insert the projections on the front of the seat into
the seat holders and push down on the seat at the
rear. Make sure that the seat is securely fitted.

1. Starter (choke) “

”

1. Seat
2. Seat lock lever

U1AB60E0.book  Page 14  Wednesday, April 29, 2009  10:19 AM

Summary of Contents for GRIZZLY 350 YFM350FAZ















































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM350FAZ

Brands by name

Popular brands

Load more brands