Yamaha GRIZZLY 125 YFM125GD Owner'S Manual Download Page 105

Page: 105 / 134

8-34

3. If the correct free play cannot be obtained as

described above, turn the adjusting bolt fully in
direction (a), and then adjust the free play us-
ing the brake lever free play adjusting nut on
the rear wheel hub.

4. Turn the brake lever free play adjusting nut on

the rear wheel hub in direction (a) to increase
the free play, and in direction (b) to decrease
it.

5. Use the adjusting bolt to obtain a precise ad-

justment if necessary, and then tighten the
locknut. If the correct free play cannot be ob-
tained, have a Yamaha dealer adjust it.

EBU24874

Drive chain slack

The drive chain slack should be checked before
each ride and adjusted if necessary.

To check the drive chain slack

1. Place the ATV on a level surface.

1. Locknut
2. Brake lever free play adjusting bolt

(a)

(b)

1. Brake lever free play adjusting nut

(a)

(b)

U1PY61E0.book Page 34 Wednesday, March 14, 2012 5:22 PM

Summary of Contents for GRIZZLY 125 YFM125GD







































































































































Search results

Summary of Contents for GRIZZLY 125 YFM125GD

Reviews:

Brands by name

Popular brands

Yamaha GRIZZLY 125 YFM125GD, Owner'S Manual

Search results

Summary of Contents for GRIZZLY 125 YFM125GD

Reviews:

Brands by name

Popular brands