120
Genos Reference Manual
Editing and Saving the Effect settings
You can edit the settings of the System Effects (Chorus, Reverb), Insertion Effects and Variation Effect. The edits can
be saved as a User Effect type.
1
From the Mixer display, touch the Effect type name to call up the Effect setting display.
2
Select the Effect Category and Type, and then adjust the parameter value by using the
controllers in the display.
3
If necessary, touch [Detail] to call up the Effect Parameter dis-
play to make additional settings.
The available parameters differ depending on the Effect type.
4
Touch
(Save) to save the settings as a User Effect type.
Up to three Effect types can be stored for each of the Reverb, Chorus and Variation
Effect Blocks while up to ten Effect types can be stored for the Insertion Effect
Blocks.
Parameters that are grayed out cannot
be edited.
NOTE
The settings will be lost if you
turn the power to the instrument
off without carrying out the Save
operation.
If you want to save the Effect settings to
a USB flash drive, save as a User Effect
file. To do this, from the display called
up via [MENU]
[Utility]
[Factory
Reset/Backup]
page 2/2, touch
[Save] of “User Effect” to carry out the
Save operation (
).
NOTICE
NOTE