Yamaha genos, Owner'S Manual

Page: 87 / 140

Genos Owner’s Manual
87
5
Adjusting the
Pa
rameters of Each Par
t—Mix
er
3
Touch a tab for editing the desired parameters.
4
Set the value of each parameter.
5
Save your Mixer settings.

To save the Panel 1/2 Mixer settings:
Register them to Registration Memory (page 93).

To save the Style 1/2 Mixer Settings:
Save them as a Style file to the User drive or USB flash drive. If you want to recall
the settings for future use, select the Style file saved here.
1
Call up the operation display via [MENU]

[Style Creator].
2
Touch [Save] to call up the Style Selection display, then save as a Style file
(page 37).

To save the MIDI Song Ch 1–8 / 9–16 Mixer Settings:
When editing and saving the MIDI Song Channel settings, a different operation is
needed. For details, see “Editing and Saving the MIDI Song Ch 1–8 / 9–16 Mixer
Settings” below.
Editing and Saving the MIDI Song Ch 1–8 / 9–16 Mixer Settings
First select a MIDI Song, and edit the parameters. Second, register the edited settings as part of the MIDI Song data
(Setup), then save the Song to the User drive or USB flash drive. If you want to recall the settings for future use, select
the Song file saved here.
1
Call up the operation display via [RECORDING]

MIDI [Multi
Recording].
2
Touch the Song name “New Song” to call up the Song Selec-
tion display, then select the desired Song.
3
Edit the desired parameters, according to “Basic Procedure for
the Mixer” (page 86) steps 1–4.
4
Press the [RECORDING] button to call up the MIDI Multi
Recording display again.
5
Register the edited settings to the MIDI Song.
5-1
Touch [Setup] to call up the Setup display.
5-2
Touch [Execute] to register the edited settings as part of the MIDI Song
data.
6
Touch [Save] to call up the Song Selection display, then save as
a Song file (page 37).
Filter For adjusting Resonance, and Cutoff (sound brightness).
EQ For adjusting equalization parameters to correct the tone or tim-
bre of the sound.
Effect For selecting an Effect type and adjusting its depth for each part.
Chorus/Reverb For selecting a Chorus/Reverb type and adjusting its depth for
each part.
Pan/Volume For adjusting panning and volume for each part.
• To reset each parameter to the default
value, touch the number value or set-
ting and hold it.
NOTE