Yamaha FZ6RZ(C), Owner'S Manual

Page: 34 / 114

INSTRUMENT AND CONTROL FUNCTIONS
4-15
4
EAU47450
Adjusting the rider seat height
The rider seat height can be adjusted to
one of two positions to suit the rider’s
preference.
The rider seat height was adjusted to
the lower position at delivery.
To change the rider seat height to
the high position
1. Remove the passenger and rider
seats. (See page 4-13.)
2. Remove the rider seat height posi-
tion adjuster by removing the ad-
juster bolts.
3. Install the rider seat height position
adjuster so that its bolt holes
marked “H” are aligned with the
bolt holes of the adjuster brackets,
and then install the adjuster bolts.
4. Insert the projection on the front of
the rider seat into seat holder B as
shown.
5. Align the lower bolt holes in the rid-
er seat with the bolt holes in the
seat brackets, and then install the
bolts.
1. Low position
2. High position
1 2
1. Rider seat height position adjuster
2. Bolt
1. Rider seat height position adjuster
2. “H” mark
3. Adjuster bracket
1 2
1
3
2
1. Projection
2. Seat holder B (for high position)
2
1
U36P11E0.book Page 15 Tuesday, September 29, 2009 5:12 PM