manualshive.com logo in svg

Yamaha FZ45YSXG, Owner'S Manual

The Yamaha FZ45YSXG Owner's Manual is essential for anyone who owns this powerful motorcycle. This comprehensive manual provides detailed instructions, maintenance tips, and safety guidelines. Download the manual for free from our website and unlock all the knowledge you need to fully enjoy the Yamaha FZ45YSXG.

Share
Download
background image

4-8

4

WARNING

EWB00221

Always set the parking brake before starting
the engine. The ATV could start moving un-
expectedly if the parking brake is not ap-
plied. This could cause loss of control or a
collision.

Always be sure you have released the park-
ing brake before you begin to ride. The brake
could overheat if you ride the ATV without re-
leasing the parking brake. You could lose
braking performance which could cause an
accident. You could also wear out the brakes
prematurely.

 

EBU18531

Shift pedal

This ATV is equipped with a constant-mesh 5-
speed transmission. The shift pedal is located on
the left side of the engine and is used in combina-
tion with the clutch when shifting.

EBU18721

Fuel tank cap

Remove the fuel tank cap by turning it counter-
clockwise.

1. Shift pedal

1

U1TD62E0.book  Page 8  Monday, May 18, 2015  9:20 AM

Summary of Contents for FZ45YSXG



























































































































































Reviews:

No comments

Related manuals for FZ45YSXG

Brands by name

Popular brands

Load more brands