manualshive.com logo in svg

Yamaha FZ45YSXG, Owner'S Manual

The Yamaha FZ45YSXG Owner's Manual is essential for anyone who owns this powerful motorcycle. This comprehensive manual provides detailed instructions, maintenance tips, and safety guidelines. Download the manual for free from our website and unlock all the knowledge you need to fully enjoy the Yamaha FZ45YSXG.

Share
Download
background image

8-36

8

3. If the drive chain slack is incorrect, adjust it as

follows.

To adjust the drive chain slack

1. Place the ATV on a level surface.
2. Loosen the rear wheel axle pinch bolts.
3. Insert a rod of a diameter of 8 mm (0.3 in) and

a length of 10 cm (4 in) into one of the holes in
the drive chain tensioner as shown.

TIP

A rod can be obtained at a Yamaha dealer to make
this adjustment.

 

4. Shift the transmission into neutral.
5. To tighten the drive chain, push the ATV

backward. To loosen the drive chain, push
the ATV forward. 

NOTICE:

 Improper drive

chain slack will overload the engine as well
as other vital parts of the ATV and can lead
to drive chain slippage or breakage. To

1. Drive chain slack

1

1. Rear wheel axle pinch bolt
2. Rod
3. Drive chain tensioner
4. Hole

3

4

2

1

1

U1TD62E0.book  Page 36  Monday, May 18, 2015  9:20 AM

Summary of Contents for FZ45YSXG



























































































































































Reviews:

No comments

Related manuals for FZ45YSXG

Brands by name

Popular brands

Load more brands