Yamaha FZ1-NW Owner'S Manual Download Page 74

Page: 74 / 98

PERIODIC MAINTENANCE AND MINOR REPAIR

6-28

If you do not have access to a
sealed-type (MF) battery charg-
er, have a Yamaha dealer
charge your battery.

EAU43010

Replacing the fuses

The main fuse, the fuel injection system
fuse, and the fuse box, which contains
the fuses for the individual circuits, are
located under the rider seat. (See page
3-15.)

If a fuse is blown, replace it as follows.

NOTE:

Include steps 2 and 6 only for the fuel
injection system fuse.

1. Turn the key to “OFF” and turn off

the electrical circuit in question.

2. Unhook the battery band, and then

remove the battery cover.

1. Main fuse

2. Fuse box

3. Fuel injection system fuse
4. Fuel injection system spare fuse

1. Fuse box
2. Ignition fuse

3. Signaling system fuse

4. Taillight fuse
5. Backup fuse (for odometer, clock and immo-

bilizer system)

6. Right radiator fan fuse

7. Left radiator fan fuse
8. Headlight fuse

9. Spare fuse

U2D121E0.book Page 28 Tuesday, September 19, 2006 1:30 PM

ProCarManuals.com

Summary of Contents for FZ1-NW



































































































Search results

Summary of Contents for FZ1-NW

Reviews:

Related manuals for FZ1-NW

Brands by name

Popular brands

Yamaha FZ1-NW, Owner'S Manual

Search results

Summary of Contents for FZ1-NW

Reviews:

Related manuals for FZ1-NW

Brands by name

Popular brands