Yamaha FZ-09 2013, Owner'S Manual

Page: 28 / 116

INSTRUMENT AND CONTROL FUNCTIONS
4-10
4
NOTICE
ECA11591
If the d isplay in d icates an error
co d e, the vehicle shoul d b e checke d
as soon as possi b le in or d er to avoi d
en g ine d ama g e.
Bri g htness control mo d e
This function allows you to adjust the
brightness of the multi-function meter
unit panel to suit the outside lighting
conditions.
To adjust the brightness
1. Turn the key to “OFF”.
2. While pushing the “SELECT” but-
ton, turn the key to “ON” and con-
tinue pushing the button until the
display switches to the brightness
control mode.
3. Push the “RESET” button to set
the brightness level.
4. Push the “SELECT” button to re-
turn to the original display.
EAU47633
D-mo d e ( d rive mo d e)
D-mode is an electronically controlled
engine performance system with three
mode selections (“STD”, “A”, and “B”).
Push the drive mode switch “MODE”
to switch between modes. (See page
4-12 for an explanation of the drive
mode switch.)
TIP
Before using D-mode, make sure you
understand its operation along with the
operation of the drive mode switch.
Mo d e “STD”
Mode “STD” is suitable for various rid-
ing conditions.
1. Brightness level display
1
1. Drive mode switch “MODE”
1