3-11
DRIVE CHAIN TENSION ADJUSTMENT
1. Loosen the locknut
1
.
2. Turn the adjusting bolt
2
clockwise until it is fin-
ger tight, and then loosen it 1/4 turn.
3. Hold the adjusting bolt
2
in place while tighten-
ing the chain adjusting locknut
1
.
T
R
.
.
Drive chain adjusting locknut:
25 Nm (2.5 m · kg, 18 ft · lb)
1
2
THROTTLE CABLE ADJUSTMENT
NOTE:
Adjust the throttle cable free play while the cable is
in the cable guide.
1. Measure:
• Throttle cable free play
a
Out of specification
→
Adjust.
2. Adjust:
• Throttle cable free play
Throttle cable free play:
3.0 ~ 4.0 mm (0.12 ~ 0.16 in)
a
Throttle body side adjustment steps:
• Remove the shroud and then left side cover.
• Loosen the locknut
1
.
• Turn the adjusting nut
2
in direction
a
or
b
until the specified free play is obtained.
3. Tighten the locknut.
NOTE:
If the specified throttle cable free play cannot be
obtained on the throttle body side of the cable, use
the adjusting nut on the handlebar side.
Direction
a
Free play is increased.
Direction
b
Free play is decreased.
2
1
a
b
