92
FWX120 Operation Manual
4
Enhancing security
Configuring the DHCP
server
The DHCP server function of the product must be
running to use the DHCP authentication function.
In the “DHCP server functions” section of the
“Configure DHCP” screen, you can configure how
the DHCP server function works.
For more details on the settings, click “Help” on the
setup screen and refer to the description displayed.
To open the “Configure DHCP” screen
From “Basic configuration page”, click the buttons
on the setup screen in the following order:
“Advanced settings” in the top page
“Configure” in “Configure DHCP”
Registering all terminals
to which IP addresses
are assigned by the
DHCP server function
T
his is useful because you do not have to register
terminals one-by-one and you can use the current
state of assignment for the registration of terminals
with the DHCP authentication function.
1
In the “Configure DHCP authentication”
section of the “Configure DHCP”
screen, click “Configure”.
To open the “Configure DHCP” screen
From “Basic configuration page”, click the
buttons on the setup screen in the following
order:
“Advanced settings” in the top page
“Configure” in “Configure DHCP”
2
In the “Terminal management” section
of the “Configure DHCP authentication”
screen, select “Enable” and then click
“Submit”.
