1 Specifying the management IP address
3
Click
2
Specify
1
Click “Configure firewall” on the top page of “Basic
configuration page”.
The “Configure firewall 1/6” screen appears.
2
Specify the management IP address.
To obtain the IP address from the DHCP server:
Click “DHCP client” to select it.
If the DHCP client identification name is assigned, enter that identification name in
the “DHCP client identification name” (there is no need to enter it if it is not assigned).
To use a fixed IP address:
Click “Static IP address” to select it, and then configure the following settings:
•
IP address:
Enter the IP address in numeric characters.
•
netmask:
Select the netmask.
•
Default gateway:
Enter the default gateway address in numeric characters.
3
Click “Next”.
The “Configure firewall 3/6” screen appears.
FWX120 Operation Manual
27
2
Connecting (to an existing network) as a transparent mode firewall