Configure settings to permit login
with SSH
The SSH server function of the product is set to
“disable” by factory default. To permit login using
SSH, in the “SSH and SFTP server function” field
on the “Configure users and access limits” screen,
change the setting to “enable”.
For more details on the settings, click “Help” on the
setup screen and refer to the description displayed.
To open the “Configure users and access
limits” screen
From “Basic configuration page”, click the buttons
on the setup screen in the following order:
“Advanced settings” in the top page
“Configure” of “Configure users and access
limits(HTTP, TELNET, SSH, SFTP)”
Connect with SSH
Follow the instructions of the SSH software to be
used.
Connect with TELNET
The following explains an example of connection
from a PC, using TELNET included as standard
in Windows 7.
Tip
In Windows 7, TELNET must be enabled by the
following procedure:
1
From “Control Panel”, select “Programs” - “Programs
and Features” - “Turn Windows features on or off”.
2
In the “Windows Features” window, select the “Telnet
Client” check box, and click “OK”.
1
From the “Start” menu, select “Search
programs and files”.
2
Type in “telnet 192.168.100.1”, and press
the Enter key.
If you have changed the IP address of the
product, type in the changed address instead
of “192.168.100.1”.
3
When “Password:” is displayed, type in
the login password and press the Enter
key.
If nothing appears on the screen, press the
Enter key once.
The password to be entered here for TELNET
is the login password for anonymous users.
144
FWX120 Operation Manual
7
Operating and managing the product
