Yamaha FT50C, Owner'S Manual

Page: 136 / 222

4-11
GB
Spark plug
Cleaning/Adjustment/
● ● ●
4-12
Replacement
Greasing points Greasing
●
4-14
Gear oil Change
● ●
4-17
Fuel system Inspection
●
4-19
Fuel filter Inspection/Replacement
● ● ●
4-20
Fuel tank Cleaning
●
4-23
Idling speed Adjustment
● ●
4-24
Anode Inspection/Replacement
1 1
4-25
Outboard motor
Inspection
● ●
4-36
exterior
Cooling water
Cleaning
● ●
4-6, 4-35
passages
Propeller
Inspection
● ●
4-26
Timing belt Inspection
1
4-28
Battery Inspection
●
(every
4-30
month)
Power trim and tilt Inspection
● ● ●
4-33
Ignition timing Inspection/Adjustment
1 1
—
Bolts and nuts Retightening
1 1
4-33
Engine oil Change
● ●
4-15
Oil filter Change
1
—
Valve clearance Inspection/Adjustment
1 1
—
Thermostat Inspection
1
—
Interval
Item
Initial Every
Refer
page
10 hours
50 hours
(3 months)
100 hours
(6 months)
200 hours
(1 year)
EMK30510*
MAINTENANCE CHART
Frequency of maintenance operations may be adjusted according to the operating con-
ditions, but the following table gives general guidelines.
The mark (
●
) indicates the check-ups which you may carry out yourself.
The mark (
1
) indicates work to be carried out by your Yamaha dealer.
NOTE:
8
When operating in salt water, turbid or muddy water, the engine should be flushed
with clean water after each use.
8
If leaded gasoline is usually used, engine valves and related parts should be inspect-
ed after every 300 hours of operation in addition to the items on the maintenance
chart above.
62Y-9-7C (E,F,ES) 4A 3/22/02 9:54 AM Page 30