Yamaha FS1R, Owner'S Manual

Page: 49 / 88

Mid Freq
❑
Mid-band Frequency
❑
Settings: 100 … 10.0k
Sets the center frequency of the middle EQ band.
Mid Gain
❑
Mid-band Gain
❑
Settings: -12 … 0 … +12
Sets the amount of boost (“+” settings) or cut (“-” settings) applied to the middle EQ band.
Mid Q
❑
Low-band Q
❑
Settings: 0.1 … 12
Sets the Q or bandwidth of the middle EQ band. Higher values produce a narrower bandwidth.
High Freq
❑
High-band Frequency
❑
Settings: 500 … 16.0k
Sets the rolloff or center frequency of the high EQ band.
High Gain
❑
Low-band Gain
❑
Settings: -12 … 0 … +12
Sets the amount of boost (“+” settings) or cut (“-” settings) applied to the high EQ band.
High Q
❑
High-band Q
❑
Settings: 0.1 … 12
Sets the Q or bandwidth of the high EQ band when the “peak” mode is selected via the “High Shape” parameter,
below. Higher values produce a narrower bandwidth. The Q parameter cannot be adjusted when the “shelv” mode
is selected.
High Shape
❑
High-band Shape
❑
Settings: peak, shelv
Determines whether the high EQ band has a peaking or shelving response. The “High Q” parameter, above, only
becomes available when the “peak” mode is selected.
49
2/FS1R/EDIT/E.qx 10/19/98 7:23 PM Page 49