Yamaha FreeGo LTK125 2019 Owner'S Manual Download

Page: 26 / 84

Instrument an

control functions

4-7

EAU12902

Front

rake lever

The front brake lever is located on the
right side of the handlebar. To apply
the front brake, pull this lever toward
the throttle grip.

EAU12952

Rear

rake lever

The rear brake lever is located on the
left side of the handlebar. To apply the
rear brake, pull this lever toward the
handlebar grip.

EAUN0440

Rear

rake lever lock

This vehicle is equipped with a rear
brake lever lock.

To lock the

rake lever

1. Pull the rear brake lever toward

the handlebar grip.

2. Push the lever lock pin down until

it latches with the lever lock pin
stopper.

To unlock the

rake lever

1. Pull the brake lever toward the

handlebar grip.

1. Front brake lever

1. Rear brake lever

1. Rear brake lever
2. Lever lock pin
3. Lever lock pin stopper

UB0PE0E0.book Page 7 Wednesday, October 17, 2018 8:48 AM

Summary of Contents for FreeGo LTK125 2019





















































































Search results

Summary of Contents for FreeGo LTK125 2019

Reviews:

Related manuals for FreeGo LTK125 2019

Brands by name

Popular brands

Yamaha FreeGo LTK125 2019, Owner'S Manual

Search results

Summary of Contents for FreeGo LTK125 2019

Reviews:

Related manuals for FreeGo LTK125 2019

Brands by name

Popular brands