Yamaha FJR13AEV(C) Owner'S Manual Download Page 42 | Manualshive

Page: 42 / 112

background image

INSTRUMENT AND CONTROL FUNCTIONS

3-24

3

Compression damping force

To increase the compression damping
force and thereby harden the compres-
sion damping, turn the adjusting screw
on each fork leg in direction (a). To de-
crease the compression damping force
and thereby soften the compression
damping, turn the adjusting screw on
each fork leg in direction (b).

CAUTION:

ECA10100

Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.

NOTE:

Although the total number of clicks of a
damping force adjusting mechanism
may not exactly match the above spec-
ifications due to small differences in
production, the actual number of clicks
always represents the entire adjusting
range. To obtain a precise adjustment,
it would be advisable to check the num-
ber of clicks of each damping force ad-
justing mechanism and to modify the
specifications as necessary.

EAU14911

Adjusting the shock absorber
assembly

This shock absorber assembly is
equipped with a spring preload adjust-
ing lever and a rebound damping force
adjusting knob.

CAUTION:

ECA10100

Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.

Spring preload

1. Compression damping force adjusting screw

Compression damping setting:

Minimum (soft):

21 click(s) in direction (b)*

Standard:

12 click(s) in direction (b)*

Maximum (hard):

1 click(s) in direction (b)*

* With the adjusting screw fully turned

in direction (a)

1. Spring preload adjusting lever

U2D21AE0.book Page 24 Monday, June 26, 2006 2:18 PM

«
...
40
41
42
43
44
...
»

Summary of Contents for FJR13AEV(C)

















































































































Reviews:

No comments

Related manuals for FJR13AEV(C)

Brand: Yamaha Pages: 78

Brand: Fast Pages: 42

Brand: DARAY Pages: 28

Brand: Backyard Play Systems Pages: 64

Brand: Haenim Pages: 2

Brand: FEAS Pages: 72

MiniLift160 Classic

Brand: Handicare Pages: 28

Brand: Hands Free Farm Pages: 24

Brand: i-Optik Pages: 75

Brand: Additel Pages: 107

Brand: Ideal Heating Pages: 16

Raven OMNiPOWER NL5000 G5

Brand: New Leader Pages: 268

HomeFill HF2POST6

Brand: Invacare Pages: 24

Brand: WhizRider Pages: 24

Brand: Dräger Medical Pages: 204

GIQ-SYS-EU-16C1

Brand: GreenIQ Pages: 76

Brand: Softing IT Networks Pages: 54

Brand: Velp Scientifica Pages: 123

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands