Yamaha FJR1300S(C) Owner'S Manual Download Page 19 | Manualshive

Page: 19 / 99

background image

INSTRUMENT AND CONTROL FUNCTIONS

3-2

3

EAU11001

Indicator and warning lights

EAU11030

Turn signal indicator lights “

” and

“

”

The corresponding indicator light flash-
es when the turn signal switch is
pushed to the left or right.

EAU11060

Neutral indicator light “

”

This indicator light comes on when the
transmission is in the neutral position.

EAU11080

High beam indicator light “

”

This indicator light comes on when the
high beam of the headlight is switched
on.

EAU11120

Oil level warning light “

”

This warning light comes on when the
engine oil level is low.
The electrical circuit of the warning light
can be checked by turning the key to
“ON”.
If the warning light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical cir-
cuit.

NOTE:

Even if the oil level is sufficient, the
warning light may flicker when riding on
a slope or during sudden acceleration
or deceleration, but this is not a mal-
function.

EAU11510

Engine trouble warning light “

”

This warning light comes on when an
electrical circuit monitoring the engine
is defective. When this occurs, have a
Yamaha dealer check the self-diagno-
sis system.
This warning light also comes on when
the fuel tank is empty. If the warning
light does not go off after refueling,
have a Yamaha dealer check the elec-
trical circuit.
The electrical circuit of the warning light
can be checked by turning the key to
“ON”. If the warning light does not come
on for a few seconds, then go off, have
a Yamaha dealer check the electrical
circuit.

EAU11542

ABS warning light “

”

If this warning light comes on or flashes
while riding, the ABS may be defective.
If this occurs, have a Yamaha dealer
check the system as soon as possible.
(See page 3-8.)

1. Left turn signal indicator light “

”

2. Right turn signal indicator light “

”

3. Neutral indicator light “

”

4. High beam indicator light “

”

5. Anti-lock Brake System (ABS) warning light

“

”

6. Oil level warning light “

”

7. Engine trouble warning light “

”

ABS

ABS

5JW11.book Page 2 Friday, May 9, 2003 4:03 PM

«
...
17
18
19
20
21
...
»

Summary of Contents for FJR1300S(C)




































































































Reviews:

No comments

Related manuals for FJR1300S(C)

PAMPERA 400 - 2006

Brand: GAS GAS Pages: 70

TXT PRO - PART LIST CHASSIS 2003

Brand: GAS GAS Pages: 36

Brand: MOTO GUZZI Pages: 61

Brand: Honda Pages: 104

Daytona Moto2 765 2020

Brand: Triumph Pages: 163

Brand: Dakota Digital Pages: 2

Brand: CF MOTO Pages: 443

Brand: Gentex Pages: 15

Brand: Shad Pages: 12

Brand: BOS Suspension Pages: 32

CYCLE HILL HD PLUS

Brand: No-Mar Pages: 4

DORSODURO 750 -

Brand: APRILIA Pages: 179

Brand: Benelli Pages: 30

Brand: Benelli Pages: 51

Brand: Benelli Pages: 51

Brand: Protekt Pages: 4

Brand: Gazzini Pages: 31

Brand: Gazzini Pages: 39

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands