Yamaha FJR 2007 Owner'S Manual Download Page 40

Page: 40 / 112

INSTRUMENT AND CONTROL FUNCTIONS

3-22

2. Pull the cowling to the open posi-

tion, and then install the quick fas-
tener screws.

To close a cowling

1. Remove the quick fastener

screws.

2. Push the cowling to the closed po-

sition, and then install the quick
fastener screws.

NOTE:

Make sure that the cowling is properly
installed before riding.

EAU39671

Rear view mirrors

The rear view mirrors of this vehicle can
be folded forward or backward for park-
ing in narrow spaces. Fold the mirrors
back to their original position before
riding.

WARNING

EWA14371

Be sure to fold the rear view mirrors
back to their original position before
riding.

1. Quick fastener screw

1. Open position

1. Quick fastener screw

1. Closed position

1. Riding position

2. Parking position

U2D211E0.book Page 22 Friday, January 5, 2007 3:56 PM

Summary of Contents for FJR 2007

















































































































Search results

Summary of Contents for FJR 2007

Reviews:

Related manuals for FJR 2007

Brands by name

Popular brands

Yamaha FJR 2007, Owner'S Manual

Search results

Summary of Contents for FJR 2007

Reviews:

Related manuals for FJR 2007

Brands by name

Popular brands