INSTRUMENT AND CONTROL FUNCTIONS
3-11
3
key on the same key ring! Immobilizer
system keys may cause signal interfer-
ence, which may prevent the engine
from starting.
2. If the engine starts, turn it off, and
try starting the engine with the
standard keys.
3. If one or both of the standard keys
do not start the engine, take the
vehicle, the code re-registering
key and both standard keys to a
Yamaha dealer and have the stan-
dard keys re-registered.
If the multi-function display indicates
any error codes, note the code number,
and then have a Yamaha dealer check
the vehicle.
EAU12344
Handlebar switches
Left
Right
EAU12380
Pass switch “
”
Press this switch to flash the head-
lights.
EAU12400
Dimmer switch “
/
”
Set this switch to “
” for the high
beam and to “
” for the low beam.
EAU12460
Turn signal switch “
/
”
To signal a right-hand turn, push this
switch to “
”. To signal a left-hand
turn, push this switch to “
”. When re-
leased, the switch returns to the center
1. Pass switch “
”
2. Windshield position adjusting switch “
”
3. Dimmer switch “
/
”
4. Turn signal switch “
/
”
5. Horn switch “
”
1. Engine stop switch “
/
”
2. Hazard switch “
”
3. Start switch “
”
U3P620E0.book Page 11 Tuesday, January 24, 2006 10:47 AM
ProCarManuals.com