INSTRUMENT AND CONTROL FUNCTIONS
4-29
4
EAU63060
Helmet hol
d
er
The helmet holder is located under the
passenger seat. A helmet holding ca-
ble is provided in the owner’s tool kit to
secure a helmet to the helmet holder.
To secure a helmet to the helmet
hol
d
er
1. Remove the passenger seat. (See
2. Pass the helmet holding cable
through the buckle on the helmet
strap as shown, and then hook the
cable loops over the helmet hold-
er.
3. Place the helmet on the right side
of the vehicle, and then install the
seat.
WARNING! Never ri
d
e with
a helmet attache
d
to the helmet
hol
d
er, since the helmet may hit
o
b
jects, causin
g
loss of control
an
d
possi
b
ly an acci
d
ent.
[EWA10162]
To release the helmet from the hel-
met hol
d
er
Remove the passenger seat, remove
the helmet holding cable from the hel-
met holder and the helmet, and then in-
stall the seat.
EAU14465
Stora
g
e compartment
The storage compartment is located
under the passenger seat. (See page
4-25.)
When storing documents or other
items in the storage compartment, be
sure to wrap them in a plastic bag so
that they will not get wet. When wash-
ing the vehicle, be careful not to let any
water enter the storage compartment.
WARNING
EWA10962
Do not excee
d
the loa
d
limit of 3
k
g
(7 l
b
) for the stora
g
e com-
partment.
1. Helmet
2. Helmet holding cable
3. Helmet holder
3
2
1
1. Storage compartment
1
U2SC10E0.book Page 29 Thursday, September 4, 2014 11:04 AM
