background image

CONSUMER INFORMATION

9-1

9

EAU26351

Identification numbers 

Record the key identification number,
vehicle identification number and mod-
el label information in the spaces pro-
vided below for assistance when
ordering spare parts from a Yamaha
dealer or for reference in case the vehi-
cle is stolen.
KEY IDENTIFICATION NUMBER:

VEHICLE IDENTIFICATION 
NUMBER:

MODEL LABEL INFORMATION:

EAU26381

Key identification number 

The key identification number is
stamped into the key tag. Record this
number in the space provided and use
it for reference when ordering a new
key.

EAU26400

Vehicle identification number 

The vehicle identification number is
stamped into the steering head pipe.
Record this number in the space pro-
vided.

NOTE:

The vehicle identification number is
used to identify your motorcycle and
may be used to register your motor-
cycle with the licensing authority in your
area.

1. Key identification number
2. Code re-registering key (red bow)

3. Standard keys (black bow)

1. Vehicle identification number

U5D0E0E0.book  Page 1  Wednesday, October 11, 2006  11:04 AM

Summary of Contents for FAZER FZ1-SA

































































































Reviews: