Engine control system
35
Illustration showing an example of the
possible buzzer location
If the alert system has activated, stop the en-
gine and check the cooling water inlets.
Check the trim angle to be sure that the
cooling water inlets are submerged.
Check the cooling water inlets for clogging.
Multiple-engine users
If the overheat alert system of one outboard
motor activates, the engine will slow down.
To turn off the alert activation on the out-
board motors not affected by overheating
(1) Stop the overheated engine.
TIP:
If the alert system has activated, stop the en-
gine and tilt the outboard motor up to check
the cooling water inlets for clogging.
(2) If the alert system is still activated, tilt the
overheated outboard motor up and re-
turn to port.
EMU47395
Low oil pressure alert
If the oil pressure drops too low, the alert sys-
tem will activate.
The engine speed will automatically de-
crease to about 2000–3500 r/min.
The low oil pressure-alert indicator will
come on or blink.
The pop-up window will appear on the
Multi-Display.
1. Cooling water inlet
1. Cooling water inlet
1
1
1. Main switch
ON
OFF
START
1
U6KNK0E0.book Page 35 Monday, November 7, 2022 10:23 AM
