Yamaha F30A, Service Manual

Page: 104 / 285

POWR
Power unit
5-9
67C3K11
Disassembling the manual starter
1. While holding the starter rope
1
, turn the
sheave drum
2
in the direction of the
arrow shown until there is no tension in
the spiral spring.
NOTE:
Push the starter plunger
3
in the direction of
the arrow shown while turning the sheave
drum
2
as shown.
2. Remove the drive plate
4
and drive pawl
spring 1
5
.
3. Remove the sheave drum
2
.
4. Remove the spiral spring
6
from the
manual starter cover.
WARNING
The spiral spring 6 can pop out. Cover
the spiral spring with rags when removing
it.
5. Remove the starter rope 1 and E-clip 7 ,
and then remove the drive pawl 8 , drive
pawl spring 2 9 , and spring 0 from the
sheave drum 2 .
Checking the manual starter
1. Check the roller, collar, drive pawl, E-clip,
starter plunger, and drive plate. Replace
if cracked or damaged.
2. Check the springs. Replace if bent,
cracked, or damaged.
S67C5026
3
1
2
S67C5027
5
4
S67C5028
2
S67C5161
6
S67C5029
0
8
7
1
9
2
8