Components
26
EMU26075
Manual starter handle
The manual starter handle is used to crank
and start the engine.
EMU26083
Starter button
To start the engine with the electric starter,
push the starter button.
EMU26092
Main switch
The main switch controls the ignition system;
its operation is described below.
“
”
(off)
With the main switch in the “
” (off) posi-
tion, the electrical circuits are off, and the key
can be removed.
“
”
(on)
With the main switch in the “
” (on) posi-
tion, the electrical circuits are on, and the key
cannot be removed.
“
”
(start)
With the main switch in the “
” (start) po-
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the “
” (on) position.
EMU47160
Steering friction adjuster
A friction device provides adjustable resis-
tance to the steering mechanism, and can be
set according to operator preference. An ad-
juster lever is located on the bottom of the til-
ler handle bracket.
To increase resistance, turn the lever to the
starboard side “A”.
To decrease resistance, turn the lever to the
port side “B”.
EWM00041
Do not overtighten the friction adjuster. If
there is too much resistance, it could be
difficult to steer, which could result in an
ZMU0
8
759
ZMU08729
ON
START
OFF
ZMU01718
6FM-28199-75-1E0.book 26 ページ ２０１９年１０月３０日 水曜日 午前１１時２３分
