Yamaha F225F, Service Manual

Page: 410 / 576

8-31
LOWR
Lower unit
8. Install the dowels
m
, cover
n
, and then
tighten the cover bolts
o
to the specified
torque.
9. Install the rubber seals
p
and water pipe
q
.
Installing the shift rod
Do not reuse an oil seal or O-ring, always
replace it with a new one.
1. Install a new O-ring
a
and a new oil seal
b
to the plate
c
.
2. Install the plate
c
to the shift rod
d
.
3. Install the shift rod
d
.
TIP:
Turn the shift rod
d
clockwise 90°, and then
push it down so that the tip
a
of the shift rod
d
fits into the groove
b
in the shift slider.
Installing the water pump
Do not reuse a gasket or O-ring, always
replace it with a new one.
Cover bolt
o
:
8 N·m (0.8 kgf·m, 5.9 ft·lb)
o
n
m
p
q
b
c
a
c
d
d
b
a
a
90°