Yamaha F225F, Service Manual

Page: 352 / 576

7-69
Power unit
POWR
Installing the oil filter bracket
Do not reuse a gasket or O-ring, always
replace it with a new one.
1. Install a new gasket
a
, the oil filter
bracket
b
, a new gasket
c
, the cover
d
,
and the holder
e
, and then tighten the oil
filter bracket bolts
f
and
g
to the speci-
fied torque in the order
a
,
b
, and so on.
2. Install the oil filter union bolt
h
, and then
tighten it to the specified torque.
3. Install a new O-ring
i
and the oil
pressure sensor
j
, and then tighten the
oil pressure sensor to the specified
torque.
4. Add a small amount of engine oil through
the oil passage
a
of the oil filter bracket.
5. Install the oil filter
k
, and then tighten it
to the specified torque.
Oil filter bracket bolt
f
and
g
:
12 N·m (1.2 kgf·m, 8.9 ft·lb)
b
d
c
a
e
f
g
a
b
c
d
e
f
f
g
g g
g
g
Oil filter union bolt
h
:
49 N·m (4.9 kgf·m, 36.1 ft·lb)
Oil pressure sensor
j
:
13 N·m (1.3 kgf·m, 9.6 ft·lb)
Oil filter wrench
l
: 90890-06830
Oil filter
k
: 18 N·m (1.8 kgf·m, 13.3 ft·lb)
h
j
i
a
k
l
k