Maintenance
81
quickly.
To prevent spilling oil where it could cause
damage to nature, it is strongly recommend-
ed that you use an oil changer to change the
engine oil. If an oil changer is not available,
drain the engine oil by removing the drain
screw. If you are not familiar with the proce-
dure for changing the engine oil, consult your
Yamaha dealer.
(1) Put the outboard motor in an upright po-
sition (not tilted).
NOTICE:
If the out-
board motor is not level, the oil level
indicated on the oil dipstick may not
be accurate.
[ECM01862]
(2) Start the engine. Warm it up and keep
the idle speed for 5-10 minutes.
(3) Stop the engine and leave it for 5-10
minutes.
(4) Remove the top cowling.
(5) Remove the oil filler cap. Pull out the dip-
stick and use the oil changer to extract
the oil completely.
TIP:
When using an oil changer, skip steps 6 and
7.
(6) Prepare a suitable container that holds a
larger amount than the engine oil capac-
ZMU03659
1. Oil filler cap
1. Oil dipstick
1. Oil changer
1
ZMU08799
1
ZMU0
8
751
1
ZMU08797
6HY-9-71-1E0.book 81 ページ ２０１９年１２月４日 水曜日 午後２時５１分
