Operation
62
EMU44620
Procedure for tilting down (power tilt
models)
(1) Push the power tilt switch “
” (up) until
the outboard motor is supported by the
tilt rod and the tilt support knob becomes
free.
(2) Pull out the tilt support knob.
(3) Push the power tilt switch “
” (down) to
lower the outboard motor to the desired
position.
EMU28063
Shallow water
EMU28074
Cruising in shallow water (manual tilt
models)
EWM01782
Run the boat at the lowest possible
speed when using the shallow water
cruising system. The tilt lock mecha-
nism does not work while the shallow
water cruising system is being used.
Hitting an underwater obstacle could
cause the outboard motor to lift out of
the water, resulting in loss of control.
Use extra care when operating in re-
verse. Too much reverse thrust can
cause the outboard motor to lift out of
the water, increasing the chance of ac-
cident and personal injury.
ECM00261
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
ZMU0
8
77
3
DN
ZMU01936
UP
DN
DN
ZMU08774
6HY-9-71-1E0.book 62 ページ ２０１９年１２月４日 水曜日 午後２時５１分
