Installation
36
(4) Mount the outboard motor on the center
line (keel line) of the boat, and ensure
that the boat itself is well balanced. Oth-
erwise the boat will be hard to steer. For
boats without a keel or which are asym-
metrical, consult your dealer.
EMU26926
Mounting height
To run your boat at optimum efficiency, the
water resistance (drag) of the boat and out-
board motor must be made as little as possi-
ble. The mounting height of the outboard
motor greatly affects the water resistance. If
the mounting height is too high, cavitation
tends to occur, thus reducing the propulsion;
and if the propeller tips cut the air, the engine
speed will rise abnormally and cause the en-
gine to overheat. If the mounting height is too
low, the water resistance will increase and
thereby reduce engine efficiency. Mount the
outboard motor so that the anti-cavitation
plate is between the bottom of the boat and
a level 25 mm (1 in) below it.
1. Handgrip
ZMU08788
1
1
1
1
ZMU08789
1. Center line (keel line)
ZMU01760
1
6HY-9-71-1E0.book 36 ページ ２０１９年１２月４日 水曜日 午後２時５１分
