Components
29
the starboard side “B” in the figure.
ECM00841
The trim tab also serves as an anode to
protect the engine from electrochemical
corrosion. Never paint the trim tab as it
will become ineffective as an anode.
EMU26263
Trim rod (tilt pin)
The position of the trim rod determines the
minimum trim angle of the outboard motor in
relation to the transom.
EMU47200
Tilt lock mechanism
The tilt lock mechanism is used to prevent
the outboard motor from lifting out of the wa-
ter when in reverse gear.
To release the lock, pull up the tilt lock lever
in the “ ” (release) position.
EMU26323
Tilt support knob
To keep the outboard motor in the tilted up
position, push the tilt support knob under the
swivel bracket.
ECM00661
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
1. Trim tab
2. Bolt
Bolt tightening torque:
18 N·m (1.8 kgf·m, 13 lb·ft)
1. Trim rod
1
2
A
B
ZMU08733
1
1
ZMU08765
1. Tilt lock lever
1. Tilt support knob
1
ZMU0
8
7
3
5
1
ZMU0
8
7
3
6
6HY-9-71-1E0.book 29 ページ ２０１９年１２月４日 水曜日 午後２時５１分
