Components
27
With the main switch in the “
” (start) po-
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the “
” (on) position.
EMU41622
Start/Stop switch panel
The engine can be started or turned off by
pressing the Start/Stop button. For twin type,
it is possible to start or turn off individual en-
gine. The indicator for the corresponding en-
gine will come on.
PORT:
Port side engine
STBD:
Starboard side engine
EMU41632
All Start/Stop switch panel
The Start/Stop button allows all engines to
start or turn off.
EMU35154
Power trim and tilt switch on digital
electronic control
The power trim and tilt system adjusts the
outboard motor angle in relation to the tran-
som. Pressing the switch “
” (up) trims the
outboard motor up, and then tilts it up. Press-
ing the switch “
” (down) tilts the outboard
motor down and trims it down. When the
switch is released, the outboard motor will
stop in its current position. For instructions
on using the power trim and tilt switch, see
pages 60 and 62.
ON
OFF
ZMU07145
START
ON
OFF
ZMU07146
1. Indicator
2. Start/Stop button
1. All Start/Stop button
1
2
ZMU07174
1
ZMU07176
U6DV72E0.book Page 27 Friday, December 19, 2014 3:38 PM
