Operation
53
4.
Use the tilt support lever to lock the mo-
tor in the up position. Operate the tilt
down switch briefly so the motor is sup-
ported by the tilt support lever.
5.
Check that the tilt rod and trim rods are
free of corrosion or other flaws.
6.
Activate the tilt-down switch until the
trim rods have retracted completely into
the cylinders.
7.
Activate the trim-up switch until the tilt
rod is fully extended. Unlock the tilt sup-
port lever.
8.
Tilt the outboard motor down. Check
that the tilt rod and trim rods operate
smoothly.
EMU36583
Battery
Check that the battery is in good condition,
and fully charged. Check that the battery
connections are clean, secure and covered
by insulating covers. The electrical contacts
of the battery and cables must be clean and
properly connected or the battery will not
start the engine.
Refer to the battery manufacturer’s instruc-
tions for checks for your particular battery.
1. Tilt rod
2. Trim rod
1. Tilt support lever
2
1
ZMU07762
1
ZMU07763
1. Trim rod
1. Tilt rod
2. Tilt support lever
1
ZMU07764
1
2
ZMU07765
U6DV72E0.book Page 53 Friday, December 19, 2014 3:38 PM
