Yamaha F200B, Service Manual

Page: 553 / 579

10-12
10
TIP:
Before installing the magnetic drain screw,
make sure to remove all metal particles.
5. Place the outboard motor in an upright
position.
6. Insert the gear oil pump into the drain
hole, and then fill the lower unit slowly
with gear oil until oil flows out of the
check hole and no air bubbles are visible.
7. Install a new gasket 5 and the check
screw
3
, and then tighten the check
screw 3 to the specified torque.
8. Remove the gear oil pump, install a new
gasket
6 and the drain screw 1 , and
then tighten the drain screw 1 to the
specified torque.
Checking the gear oil level
1. Check the gear oil level. See “Checking
the gear oil level” (10-6).
Replacing the OCV filter
1. Remove the OCV assemblies.
2. Replace the OCV filter 1 of each OCV
assembly.
3. Install the OCV assemblies. See step 4
in “Installing the cylinder head” (7-68).
2
1
3 4
3
5
Recommended gear oil:
Hypoid gear oil
API: GL-4
SAE: 90
Oil quantity:
Regular rotation model:
1.150 L (1.216 US qt, 1.012 lmp qt)
Counter rotation model:
1.000 L (1.057 US qt, 0.880 lmp qt)
Check screw
3
:
9 N·m (0.9 kgf·m, 6.6 ft·lb)
Drain screw 1 : 9 N·m (0.9 kgf·m, 6.6 ft·lb)
6
1
1
General periodic maintenance