Yamaha F200B, Service Manual

Page: 499 / 579

9-24
9
Disassembling the oil pan and
exhaust manifold
1. Remove the oil pan assembly bolt 1 .
2. Remove the muffler 2 , plate 3 , and
then remove the exhaust manifold 4 .
3. Remove the oil pan
5
, and then remove
the oil strainer
6
.
Checking the oil pan and exhaust
manifold
1. Clean the removed parts.
2. Check the exhaust guides, exhaust man-
ifold, and muffler. Replace if corroded or
cracked.
3. Check the oil pan. Replace if corroded or
cracked.
Checking the oil strainer
1. Check the oil strainer. Clean if there is
dirt and residue.
Assembling the oil pan and exhaust
manifold
Do not reuse a gasket or rubber seal,
always replace it with a new one.
1. Install the dowels 1 , a new gasket 2 ,
and the lower exhaust guide 3 .
2. Install a new gasket 4 and the oil
strainer 5 , and then tighten the oil
strainer bolts 6 to the specified torque.
1
2
3
4
5
6
Oil pan and exhaust manifold