INSP
ADJ
CONTROL SYSTEM
3-10
Start-in-gear protection device adjustment
(MH models)
1. Check:
9
Start-in-gear protection device opera-
tion
Incorrect
→
Adjust.
2. Adjust:
9
Start-in-gear protection device cable
E
Adjusting steps:
8
Set the shift lever in the neutral posi-
tion.
8
Loosen the locknut
1
.
8
Adjust the start-in-gear protection
device cable adjusting nut
2
so that
the point on the wire connector
3
aligns with the mark
a
on the fly-
wheel cover.
8
Tighten the locknut.
NOTE:
Shift the shift lever into neutral and make
sure the starter can be pulled. If it cannot
be pulled, repeat the above procedure.
