3-5
INSP
ADJ
E
CONTROL SYSTEM
Throttle link lever adjustment
NOTE:
Before adjusting the throttle link lever,
make sure the throttle cables or the remote
control throttle cable are properly adjusted.
1. Check:
9
Throttle link lever
Bends/damage
→
Replace.
9
Adjusting screw
Loose
→
Adjust the throttle link lever.
9
Throttle link lever
Incorrect position
→
Adjust.
Adjusting steps:
8
Put the shift lever into the forward
position.
8
Loosen the screw
1
.
8
Turn the throttle grip or set the throttle
on the remote control to the fully-
opened position so the upper stopper
2
on the throttle control cam contacts
the stopper
3
on the throttle control
cam bracket.
8
Turn the throttle link lever
4
clockwise
until it contacts the stopper
5
(this is
its fully-opened position). Then, hold it
in this position.
8
Tighten the screw.
8
Fully open and close the throttle grip
and make sure the throttle link lever
fully opens (completely lowers) and
fully closes (contacts the throttle stop
screw
6
). If it does not fully open and
close properly, repeat the above pro-
cedure.
2. Adjust:
9
Throttle link lever
Å
MH/EH models
ı
E models
A
B
